
An HHO generator electrolyzes water into a hydrogen-oxygen mixture that burns at around 3,000°C. This guide explains how oxyhydrogen welding and brazing work, which models suit which jobs, and what to compare before buying.
Buyers who search for “what is an HHO generator” usually want a practical answer before requesting a quote: what the machine does, what the flame can do, and which model fits the workshop. This guide answers those questions for jewelry makers, HVAC shops, transformer plants and anyone comparing an oxyhydrogen machine against acetylene or LPG cylinders.
What an HHO generator actually does
An HHO generator — also called an oxyhydrogen generator or brown gas generator — splits water into hydrogen and oxygen by electrolysis. The two gases are produced together in a 2:1 ratio and burned as one mixture through a small torch. Because the fuel comes from water and electricity, the machine does not need gas cylinders, and gas production starts when you switch the unit on and stops when you switch it off.
The mixture burns with a concentrated flame at roughly 3,000°C, hot enough to melt and fuse brass, copper, silver, gold and thin steel. That temperature and the small, precise flame are the reason oxyhydrogen machines are common in jewelry welding, eyewear and trophy fabrication, chandelier manufacturing, copper pipe brazing and electric motor repair.
Why workshops switch from cylinder gas
- No stored fuel: gas is generated on demand, so there are no high-pressure cylinders to store, refill or transport.
- Controllable flame: the flame is small and focused, which suits fine work such as jewelry soldering and thin-walled brazing.
- Simple consumption model: running cost is electricity plus purified water, rather than recurring gas purchases.
Which model fits which job
The practical selector is gas output per hour, listed for each machine together with its power rating. Lower-output units suit bench-top jewelry and repair work; mid-range units cover workshop brazing and small production; the largest industrial units feed multi-torch stations or automated lines.
| Model | Gas output | Power | Power supply | Water supply | Typical use |
|---|---|---|---|---|---|
| DY300 | 300 L/h | 1,200 W | 220 V | Manual | Jewelry welding, fine soldering |
| DY400 / DY600 | 400–600 L/h | 1,600–2,400 W | 220 V | Manual | Bench brazing, repair shops |
| DY1000 | 1,000 L/h | 3.5 kW | 220 V | Manual | Workshop brazing, motor repair |
| DY2000 | 2,000 L/h | 7 kW | 380 V | Automatic | Transformers, continuous bench work |
| DY3500–DY6000 | 3,500–6,000 L/h | 10–20 kW | 380 V | Automatic | Production lines, boiler support |
| DY10000 / DY20000 | 10,000–20,000 L/h | 35–70 kW | 380 V | Automatic | Large industrial welding and brazing |
All DY-series models run on purified water and produce the flame at a working pressure of up to 0.2 MPa; from DY2000 upward the machines add automatic water supply and water cooling for continuous shifts. You can compare the current range on the DY300 hydrogen welding machine page and step up through the series as your gas demand grows.
What to confirm before buying
- Match output to the torch: confirm the gas output covers your torch count and duty cycle, with some margin.
- Confirm power supply: DY300–DY1000 run from 220 V single phase; DY2000 and larger models are 380 V three phase.
- Check cooling and water supply: bench-top models use manual water filling and air cooling; DY2000 and larger models use automatic water supply and water cooling for long runs.
- Ask about flashback protection and dry-burn protection for the machine you intend to order — these are the details that matter in daily use.
- Follow the operating manual on site: keep the work area ventilated, check the water level before igniting the flame, and never run the machine dry.
When you compare options, weigh water supply, power availability and protection features alongside gas output — output alone is not the full decision. If you tell us the material, thickness and duty cycle of your work, we can recommend a model and flame-torch configuration that matches the job. The DY20000 industrial HHO generator page shows the largest configuration for reference.
LEAVE A MESSAGE
WE EXPORTED TO




